Free Videos
GeoGuides Talks GEO 03 – Part 1 of 2, with Rafie Al Suhily: Design of Toe Filters in Embankments
This series is called GeoGuides talks where we talk about different subjects in geotechnical engineering. This episode is about toe filters design and it is in two parts. This is part1. Ahmed Mufty, Ph.D., P.Eng. Geomechanics Specialist, Rocscience Inc., Toronto, Canada
GeoGuides ST 01, Self Compacitng Conceret Columns Reinforced with Steel Tubes
This series is brought to you by Dr. Ahmed Mufty – Talks with specialists in structural engineering. This video is the first in series ST 01.
This conversation is about Self compacitng Conceret Columns reinforced with steel tubes instead of bars.
Free Access
From Modelling to Real Case Studies using Settle3
This webinar that was held on July 21st, 2021 was conducted in collaboration with Terracon. The Rocscience Team led by Dr. Ahmed Mufty, Steve Chai, and Yipin Lu elaborated the latest features in Settle3 and its applications while Dr. Deniz Karadeniz from Terracon demonstrated some real case studies conducted with the help of Settle3.
Free Access
RSPile Webinar – New Features and Applications
This webinar held on March 23rd, 2020, showcased the new features and applications of Rocscience’s robust 3D Pile Analysis Program, RSPile.
Free Access
Webinar Recording – RSPile Webinar Series Part I: Pile Capacity Analysis
The first part of this 4-part webinar series on RSPile covered Pile Capacity Analysis along with major functionalities of the program using the latest version. This was instructed by Dr. Ahmed Mufty on February 22nd, 2023.
Free Access
Webinar Recording – RSPile Part II: Applications of Axial and Lateral Pile Analysis
The second segment in the 4-part RSPile Webinar series covered applications of Axial and Lateral Pile Analysis along with major functionalities of the program using the latest version featuring the brand-new User Interface. This session was instructed by Dr. Ahmed Mufty on March 30th, 2023, at 1pm Eastern Standard Time.
Webinar Recording – RSPile Part III: Analysis of Pile Groups
The third segment in the 4-part RSPile Webinar series covered Analysis of Pile Groups along with major functionalities of the program using the latest version featuring the brand-new User Interface. This session was instructed by Dr. Ahmed Mufty on April 19, 2023, at 1pm Eastern Standard Time.
Webinar Recording – RSPile Part IV: Structural Design and Capacity Ratio
The final segment in the 4-part RSPile Webinar series covered Structural Design and Capacity Ratio along with major functionalities of the program using the latest version featuring the brand-new User Interface. This session was instructed by Dr. Ahmed Mufty on May 17, 2023, at 1pm Eastern Standard Time.